Category: Cheese Rind
Cheesemaking: How To Make Belper Knolle Cheese
Recipe
What You Need
1 Gallon of Milk (Not UltraPasteurized)
1 Packet C20G Chevre Culture
1/2 tsp Pink Himalayan Salt or Cheese Salt
2-3 Garlic Cloves
1.5-2 Tbs Toasted Black Peppercorns
1/4 tsp Calcium Chloride (for pasteurized milk)
What To Do
1. If you are using pasteurized milk, add about 1/8-1/4 tsp of Calcium Chloride at this point. The first step is to heat and acidify the milk. So let’s begin by heating the milk to 86F. To do this, place the milk in a container and then place it in a large pot of very warm water. If you heat it on the stove, be sure to heat it slowly and stir it as it heats if you heat it on the stove.
Once you are done heating the milk, you can add the culture. The powder can become very cakey and sink in clumps so to prevent this, sprinkle the culture over the surface of the milk and then let it sit for a couple of minutes. This allows the powder to re-hydrate before you stir it in. After stirring, let the milk sit for a further 30 minutes so that the culture can get to work.
2. Now you just need to let the milk sit at room temperature for 12-14 hours. The temperature is bound to drop during this time. If you are making this recipe in the winter, it is best to keep the pot covered with towels or a blanket to keep it from getting cool. The best time to make this recipe is in the evening because the curds will be ready to drain in the morning and can be draining whilst you’re busy at work or doing other things.
The milk sugar is converted into lactic acid while the bacteria in the culture works. This increases the acidity of the milk and eventually causes the milk to form the curd.
The rennet also helps coagulate the milk. The milk will thicken into a gel-like texture after a few hours but really needs more time to become properly firm. The finished curd will begin to show whey rising to the surface.
3. The next task is to separate the whey and curds.
To begin, line the sanitized colander with the cheesecloth in preparation for draining. If you want to save the whey for cooking or other things, just drain it all into another pot.
The curds are now ready to be transferred to the draining cloth.
Once the curds drain for a short time, the cloth can be gathered, tied securely and hung for the final drainage. You can do this overnight or for several hours, depending on how dry you want the final cheese to be.
4. Now is the time to add the salt and garlic. Once the curd has fully dried, you can blend the salt and garlic into the curds.
Use around 2-3 cloves of garlic chopped into small pieces. Now add them to a mortar along with 1.5 tsp of the Himalayan pink salt, then crush them with the pestle making a uniform paste.
The drained curds will look like dough.
Transfer the curd to a bowl along with the salt/garlic paste, then begin mashing the curds and paste uniformly using a large spoon. Now allow this to sit as you prepare the black pepper coating.
5. Grind the toasted peppercorns to a medium-fine size. Spread them out evenly on a cookie sheet or your counter if you don’t mind making a mess.
6. Once everything is blended and mashed, you can take a small handful of the cheese and form it into a ball like a snowball.
The one-gallon batch should make around 5-6 balls which are slightly larger than golf ball sized cheeses. All you have to do is roll the cheese around in the ground pepper surface that you have prepared.
The cheese will still be tender due to high moisture, so handle it carefully as you transfer it to the drying mat.
7. You can now dry the cheese out before it is placed into the cave. This can be one by placing it in a room at about 50-60F and a moisture of 65-70% moisture. A fan can also be set at a low/medium speed to increase the rate of moisture released.
The reason for all this is to produce a firm, dry crust. This will become a lighter color as it dries. The pepper coating will keep the surface free of mold.
8. Aging can now finally begin. The cheese can go to the cave with about 52-56F temperature and 75-80% moisture. The higher moisture helps the aging of the cheese as it continues to dry to the center and achieve a uniform moisture that will be perfect for use as thin shavings.
The final cheese will be ready in 4-6 weeks but will continue to improve in flavor for a few months.
Cheesemaking: How To Make Alpine Tomme
This recipe will be made with 2 gallons of milk. However, if you want to make a 4-gallon batch it can be a lot better because it seems larger formats ripen a lot easier. The smaller batch size can be easier for home cheese makers.
Recipe
What You Need
2 Gallons of Milk (Not UltraPasteurized)
1/2 Packet C201 Thermophilic Culture
1.75 ml (1/4 + 1/8 tsp) Single Strength Liquid Rennet
Salt
Calcium Chloride (for pasteurized milk)
What To Do
1. The first step is to heat and acidify the milk. So let’s begin by heating the milk to 92F. To do this, place the milk in a container and then place it in a large pot of very warm water. If you heat it on the stove, be sure to heat it slowly and stir it as it heats if you heat it on the stove.
The culture being used here is a Thermophilic Culture (C201) made up of two types of bacteria. These have an optimum temperature of 108-112°F but you will start them working at the lower temperature end of their range. This will give them a slower start which is in line with the long acid development phase for this cheese and will be helpful in preserving the calcium in the curd resulting in a more elastic curd.
Once you are done heating the milk, you can add the culture. The powder can become very cakey and sink in clumps so to prevent this, sprinkle the culture over the surface of the milk and then let it sit for a couple of minutes. This allows the powder to re-hydrate before you stir it in. After stirring, let the milk sit for a further 90 minutes so that the culture can get to work.
2. After 90 minutes of ripening, add about 1.75ml of the single strength liquid rennet. Stir the rennet in for about a minute in a slow up and down motion. The rennet will begin to coagulate the curd, let it sit for another hour. You will see the milk thicken after around 20 minutes, but it still needs the full hour for a proper curd to form.
One way to check for a good card, insert a knife into the curd at a 45-degree angle and lift slowly until the curd breaks. The edges should break cleanly and the whey that will rise should be clear, not cloudy.
Remember to utilize coagulation times by sanitizing the cheese molds and draining boards.
3. Begin by breaking up the curd with two vertical cuts at a right angle about 3/4-1 inch apart. It will look like a checkerboard. Now allow the curd to sit for 3-5 minutes while the cut edges heal slightly. Some whey may rise to the surface as well as in the cuts as this happens.
The next cut can be considered to be the most difficult. You need to cut the columns of curd into even sized pieces.
The final cut will be between 1/4-3/8 in. You can do this with a spoon of a flat ladle.
4. Now is the time to cook the curds. Once you have cut the curds to the desired size, you can begin using a spoon to slowly keep the curds separate. Stir the curds slowly for 5-10 minutes, just enough to dry the surfaces slightly and firm the curds for the cooking to follow. Now reheat to 92F if the temperature has decreased.
The process of heating the curds can be done quite like when making Gouda. We need to process to slow the acid development. This will effectively reduce the lactose supply and limit the food supply for the culture, which will make it a sweeter cheese:
– Allow the curds to settle to the bottom of the vat/pot
– Remove about 25% of the whey
– While stirring add back the same amount of hot water (120-130°F) slowly over about 20 minutes
– The final temperature should be about 108-110°F.
Once you have reached this point, the curds can be stirred for another 15-20 minutes to reach their final dryness.
5. When the final curd is ready, allow the curd mass to settle and remove the whey down to the level of the curd mass.
You can do this by spreading the draining cloth on the bottom and placing the curd mass into the cloth, the corners being ready to remove the entire curd mass to the mold. The reason for this consolidation in the whey is to help get a very tight curd mass so that there will be few mechanical openings in the final cheese. It is a character which all the Alpine-style cheeses have.
After this, transfer the curds to the molds by opening the cloths and pressing firmly into the mold. Pull up on the cloth to remove wrinkles and prepare to press the cheese.
6a. The cheese is now ready to be pressed.
These measurements are for 2-gallon sized batches but you can double these weights if you are doing a 4-gallon batch.
As always pressing needs to begin lightly and you must slowly increase the press weight to a moderate level:
– 30 minutes at 20lbs.
– 30 minutes at 40lbs
– 3 hours at 50lbs
– 3 hours with no weight but keep warm still
There is usually very little acid produced at the beginning of pressing so there will be a lot of lactose left in the cheese mass. This means that they must be fermented before the cheese is salted to avoid late fermentation problems in the aging. In turn, the temperature must be kept warm 80-85F to allow the culture to complete its work and ferment the remaining lactose.
6b. The rate of whey running off should be a matter of drops and not a stream. This is a good rate of whey removal during pressing and will slow even more as the residual free moisture is released. At the beginning of pressing there is very little acid produced so there is a lot of lactose left in the cheese mass. This must be fermented before the cheese is salted to avoid late fermentation problems in the aging. Therefore the temperature must be kept warm 80-85F to allow the culture to complete its work and ferment the remaining lactose.
7. Saturated brine is needed for the salting of the cheese, here is a simple brine formula:
– 1 gallon of water
– 2.25 lbs of salt
– 1 Tbs calcium chloride
– 1 tsp white vinegar
– Bring the brine and cheese to 50-55F before using.
When the cheese cools enough it can be floated in the brine for 1.5-1.75 hours brine time per lb of cheese. If you want moister cheese, use less time. Due to the brines high density, the cheese will float in the brine. Be sure to turn the cheese at least once during the soaking.
8. Now it is time to age the cheese. You can place it into the aging room at 52-56F and 85-90% moisture. Age the cheese for around 2-3 weeks, after this time, the rind will have formed and olive oil can be added to the surface to discourage mold as well as making it easier to remove if it does appear. The cheese can now be aged for a further 3-6 month and it will be then ready for serving.
Cheesemaking: How To Make Bel Pease Cheese
Even though this cheese is usually made with pasteurized milk, you can make it with high-quality raw milk if you so wish. However, this recipe does use pasteurized milk.
If you are going to make your own version using raw milk, be sure to decrease the culture amounts by around 40% and the rennet by 20-30%, depending on the specific milk you use.
Recipe
What You Need
2 Gallons of Milk (Not UltraPasteurized)*
1/64 tsp C7 Geotrichum Candidum
1/16 tsp MA011 Culture
1/32 tsp MM100 Culture
1/16 tsp TA061 Culture
1/4 tsp (1.25ml) Single Strength Liquid Rennet
Salt and Calcium Chloride for a Brine
Calcium Chloride (for pasteurized milk)
What To Do
1. The first step is to heat and acidify the milk. So let’s begin by heating the milk to 102F To do this, place the milk in a container and then place it in a large pot of very warm water. If you heat it on the stove, be sure to heat it slowly and stir it as it heats if you heat it on the stove.
Once you are done heating the milk, you can add the culture:
– 1/64 tsp of Geotrichum (its just a pinch)
– 1/16 tsp of MA011
– 1/32 tsp of MM100
– 1/16 tsp of TA061
It is a very low dose and a customized blend of culture.
The powder can become very cakey and sink in clumps so to prevent this, sprinkle the culture over the surface of the milk and then let it sit for a couple of minutes. This allows the powder to re-hydrate before you stir it in. After stirring, let the milk sit for a further hour so that the culture can get to work.
2. After an hour of ripening, add 1/4 tsp. single strength liquid rennet. Stir the rennet in for about a minute in a slow up and down motion. The rennet will begin to coagulate the curd, let it sit for 20 minutes. You will see the milk thicken after around 8 minutes, but it still needs the full 20 minutes for a proper curd to form.
One way to check for a good card, insert a knife into the curd at a 45-degree angle and lift slowly until the curd breaks. The edges should break cleanly and the whey that will rise should be clear, not cloudy.
Remember to utilize coagulation times by sanitizing the cheese molds and draining boards.
3. Once the curd is firm, you can begin to cut it into 3/8 inch pieces as evenly as possible, using a knife to make vertical cuts.
Stir the curds gently enough to keep them separated for about 5 minutes. This will allow for the curd surface to harden enough for a long stir. Make sure you allow the curds to settle for about another 5 minutes to allow the whey to rise.
The curds will appear to be soft and show very little structure, while the whey may be opaque.
4. You can now begin to dry out the curds. This can be done by increasing the heat slowly to 108F. You need to increase the temperature at the rate of 3-5F per 5 minutes at the beginning, making the total cooking time 25-30 minutes, but may be extended if the curds are still soft.
The curds will become firmer and the whey will appear more translucent.
You should examine the curds to make sure enough moisture has been removed. Broken curds should be firm throughout and the curds should be firm throughout and the curds should have a moderate resistance when pressed between the fingers.
The curd is ready when a handful of curds pressed together easily separate with a little pressure from the thumb. At this point, the curds can be allowed to settle under the whey.
5. The whey should first be removed to the curd surface in the vat. You can transfer the curds to a colander lined with butter muslin. Allow them to be drained for a few minutes, gently stirring the curds will make sure the whey drains off.
6. Begin the initial pressing with a moderate hand pressure.
The curd mass can be transferred to a mold which has been sanitized. The initial firm hand pressure should begin to set the initial cheese surface. The curd will still be quite warm at this point and should come together quite easily.
The curd mass should be lightly set and removed from the press after a few minutes. It is now ready to be opened, turned and re-wrapped as before.
Please note that it is important to keep the cheese warm during the pressing cycle.
7. Now is time to add 5-8lbs of pressure to consolidate the curds. Be sure that the cloth is pulled up well and smoothed around the cheese to form as smooth a surface as possible. You only need to use very light pressure here.
It is important you keep a smooth surface as possible, this will ensure the aging and surface development will have a good result.
The unwrapping, turning, and repress cycle should be repeated about 5 times within the first 30-40 minutes after molding the cheese.
The weight can be removed once a firm surface has developed, meaning the cheese can be returned to the mold.
The cheese will be ready for brining within 6-7 hours of cutting the curds.
8. You will need saturated brine for the salting process, a simple brine formula being:
– 1 gallon of water
– 2.25 lbs of salt
– 1tbs. calcium chloride
– 1 tsp. white vinegar
– Bring the brine to 50-55°F before using.
When the cheese cools enough it can be floated in the brine for 1-1.25 hours brine time per lb of cheese. If you want moister cheese, use less time. Due to the brines high density, the cheese will float in the brine. Be sure to turn the cheese at least once during the soaking.
9. Now it is time to age the cheese. You can place it into the aging room at 52-56F and 90-95% moisture. In around 5-8 days, the surface will develop a greasy surface, which is caused by yeast. When this occurs, you can use a light brine wash (3-6% strength, 1-2 tbs. salt to 1 cup cool water ) every 3-5 days for 3 weeks.
With this, a thin rind cover will develop as a dusty white surface. Once it is covered in it, wash off with 5% brine and then dry and wrap in waxed paper. Then store at 40F for another 2-3 weeks until it is ripe.
How To Make Mozzarella In 30 Minutes
Recipe
A few things to note before making this recipe:
– Make sure the milk you use is not ultra pasteurized
– You can use homogenized or non-homogenized milk
– Farm fresh milk is a great option if you can find it locally
– Low-fat milk will work but the cheese will be drier and less flavorful
What You Need
1 Gallon of Milk (Not UltraPasteurized)
1 1/2 Tsp Citric Acid
1/4 Rennet Tablet or 1/4 tsp Single Strength Liquid Rennet
Cheese Salt
What To Do
1. Start by preparing your work area, make sure that you are not preparing other food while making this cheese.
Be sure to have a clean work area, moving everything away and sanitizing your counter, stove and sink with soap and water. Use an antibacterial cleaner to wipe down all surfaces.
2. Now is time to prepare the rennet. Crush a 1/4 tablet of rennet and dissolve in a 1/4 cup of cool un-chlorinated water or add 1/4 Tsp of single strength liquid rennet to the water. Then, set your mixture aside to use for later.
3. Mix 1 1/2 Tsp of citric acid, to a cup of cool water and add it to your pot.
Then pour cold milk into your pot quickly to mix well with the citric acid. This will make sure the milk is at a proper acidity to stretch it well later.
4. Now heat the milk slowly to 90F. You will notice that your milk is beginning to curdle slightly when it starts to come close to 90F, this is because of the acidity and temperature.
You may need to increase the temperature to 95F or even 100F if the milk is having problems with forming a proper curd.
5. Once your temperature is at 90F, remove your pot from the stove and slowly add your rennet to the milk. Stir it for 30 seconds in a top to bottom motion and then stop.
Now cover the pot and leave undisturbed for 5 minutes.
After 5 minutes, check the curd. It should look like custard with a clear separation between the curds and the whey. Let the curd sit for a few more minutes if it is too soft or the whey is a cloudy appearance.
6. Begin cutting the curds into a 1-inch checkerboard pattern.
Now place the pot back on the stove and heat the curd back to 105F while slowly stirring the curds with a ladle. Once at 105F, take the pot off the burner and continue to stir it slowly for 2-5 minutes.
7. Scoop the curds into a colander with a slotted spoon. If the curds appear too soft, let it sit for another minute or so.
Once you have transferred the curd, press the curd gently with your hand, pouring off as much whey as you can. If you wish, you can keep the whey for later use in baking or cooking.
8. Transfer the curds to a heat safe bowl and microwave the curd for 1 minute.
There will be noticeable whey separation from the curd, so drain off all the whey as you did before. Work the cheese with a spoon or your hands until it is cool enough to touch.
Microwave it two more times for 35 seconds each, and repeat the kneading as in the last step to aid in more whey drain off and ensure even heating of the curds. Drain off all of the whey as you go.
9. Now to begin stretching and kneading the curd. Start by quickly kneading the bread dough. Remove the curd from the bowl and continue kneading it until it is smooth and shiny. If needed, return it to the microwave if it begins to cool off before it is ready to stretch. Near finishing time, add salt. The cheese should be soft enough to stretch and stretch however you desire. This is what makes it Mozzarella after all.
10. In this step, knead your cheese back into a big ball until it is smooth and shiny. Now your Mozzarella will be ready as soon as it’s cool enough to eat. If you want to cool it quickly, place it into a bowl of ice water and refrigerate it.
Cheesemaking: How To Make Crottin de Chavignol Cheese